¿Cómo configurar la WIFI y actualizar el firmware de varios Shelly 2PM de forma rápida?

How to set up Wi-Fi and update firmware on multiple Shelly 2PM devices quickly?

February 3, 2025

Of course, here is a manual to configure and update the Shelly 2PM firmware using the Sit-IoT app:

1. Download and installation:

Download the Sit-IoT app from the Google Play Store .
Install the app on your mobile device.

2. Connecting to the Wi-Fi network:

Open the Sit-IoT app and log in.
Make sure your mobile device is connected to the Wi-Fi network you want to connect Shelly 2PM to.
In the app, go to "Add New Device."
Verify that the app shows the correct Wi-Fi network.
Enter the Wi-Fi network configuration parameters, including the network name (SSID) and password.
Optional: You can configure additional options such as static IP, enable hotspot, or connect Shelly in extension mode.
Optional: If you want to use an MQTT broker, you can configure it in this section.

3. Automatic configuration:

In the "Add new devices" section, start the automatic configuration.
The app will automatically search for and configure Shelly devices that are within range.
Wait for the app to finish setting up all devices.

4. Firmware update:

Once your devices are set up, go to the "Device Status" section.
Check if a new firmware version is available.
If an update is available, click "Update."
Wait for the firmware to download and install.
The device will automatically reboot after the update.

5. Advanced Settings:

In the "Advanced Settings" section, you can change the device name, Wi-Fi settings, and access the built-in web server.
You can check your Wi-Fi signal strength and change the network if necessary.
You can also perform a factory reset or restart your device.

6. Enable the cloud:

Once you've set up and updated the firmware on your Shelly 2PM, you can enable the cloud with the Shelly app.
This will allow you to control your device remotely and create scenes.

Additional tips:

Make sure your Wi-Fi signal is strong enough for Shelly 2PM.
Avoid connecting your device to networks with weak signals (indicated in red in the app).
If you're having trouble connecting or updating your device, try restarting or resetting it to factory settings.

Congratulations! You've successfully set up and updated your Shelly 2PM using the Sit-IoT app. You can now enjoy all the features this device offers.